MIL-G-80048C
Optional equipment shall be furnished as
Optional equipment.
3.14
specified and fully described, (see 6.2.1).
3.15
Unless otherwise specified (see
Lubrication chart or plate.
6.2.1), a lubrication chart or plate shall be securely attached to the
If a chart is furnished, it shall be placed in a transparent
machine.
plastic folder, or permanently sealed between clear plastic sheets, with
suitable means for mounting. The following information shall be furnished
on the chart or plate:
Points of application
Service interval
Type of lubricant
Viscosity
3.16 Nameplate. A corrosion-resistant metal nameplate marked with the
following information shall be securely attached to each machine.
If the
machine is a special model, the model designation shall include the model
of the basic standard machine and a suffix keyed to the manufacturer's
The captions listed may be shortened or abbreviated,
permanent records.
provided the entry for each such caption is clear as to its identity.
Nomenclature
Manufacturer's name
Manufacturer's model designation
Manufacturer's serial number
Size
inch diameter
Workpiece capacity range
to
Technical data shall be furnished as specified
3.17 Technical data.
(see 6.2.2).
3.18 Workmanship. Workmanship of the machine and accessories shall be
of a quality equal to that of the manufacturer's commercial equipment of
the type specified herein.
4. QUALITY ASSURANCE PROVISIONS.
Unless otherwise specified in the
4.1 Responsibility for inspection.
contract or purchase order, the contractor is responsible for the
performance of-all inspection requirements as specified herein. Except as
otherwise specified, the contractor may utilize his own or any other
facilities suitable for the performance of the inspection requirements
The government
specified herein, unless disapproved by the government.
"
reserves the right to perform any of-the inspections set forth in the
specification when such action is deemed necessary to assure supplies and
services conform to prescribed requirements.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business