INCH-POUND
A-A-51179B
4 November 2005
SUPERSEDING A-A-51179A
17 July 1996
COMMERCIAL ITEM DESCRIPTION
GRINDING MACHINES, UTILITY, BENCH AND PEDESTAL The General Services Administration has authorized the use of this
commercial item description for all federal agencies.
1. SCOPE. This commercial item description (CID) covers the requirements for electric motor driven, two-wheel, utility type, bench and pedestal mounted, grinding machines.
1.2 Intended use. The grinding machines covered by this CID are intended for grinding of tools and workparts which are held in the operator's hands. It does not cover cutting-off, cylindrical, internal, portable, saw gumming, snagging or tool grinding machines.
2. CLASSIFICATION. The grinding machines shall be of the following styles and sizes.
2.1 Style. The style to be furnished shall be as specified (see 7.3(b)).
Style I - Bench mounted
Style II - Pedestal mounted
2.2 Size. The size to be furnished shall be as specified (see 7.3(c)).
Size 6 - 6-inch grinding wheel Size 7 - 7-inch grinding wheel Size 8 - 8-inch grinding wheel Size 10 - 10-inch grinding wheel Size 12 - 12-inch grinding wheel Size 14 - 14-inch grinding wheel
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to: STDZNMGT@dla.mil or Defense Supply Center Richmond (DSCR), ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616.
AMSC N/A FSC 3415
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business